Tuesday, November 22, 2016

Piper PA-46-350P Malibu Mirage, Flying Colors Aviation LLC, N962DA: Fatal accident occurred May 07, 2015 in Spokane, Washington

SPOKANE, Wash. - Two men who died in a Spokane plane crash back in 2015 lost their lives as the result of a mechanic's mistake, according to a report from the National Transportation Safety Board. 

The privately owned Piper PA-46-350P Malibu Mirage rolled into the Spokane River while it was trying to make an emergency landing at Felts Field. 

First and foremost, the NTSB blamed Rocket Engineering, a tenant here at Felts Field, for improperly installing a pair of cables that controlled the plane's ailerons. 

The Piper PA-46-350P Malibu Mirage was getting its annual inspection and investigators think Rocket's mechanic and test pilot may have been in a hurry to get the work complete and return the plane to their customer.

Test pilot Richard Runyon had trouble steering the ill-fated plane as soon as it lifted off the runway. Air traffic controllers saw the Piper roll to the right and lose 700 feet of altitude before Runyon was able to pull out of the spiraling dive. The tower radioed Runyon, asking if everything was OK. Runyon replied, “That's negative.”

Runyon's years behind the yoke in the Air Force and as a commercial pilot had bought himself some time to figure out what was wrong.

“If you have any kind of emergency situation, the first thing you want to do is continue to fly the plane,” flight instructor Rick Webber told KXLY4 in May 2015.

Runyon then realized the controls that allow the plane to bank through turns wasn't working properly. On his radio, he declared 'We have a control emergency there, a hard right aileron.”

Runyon and his fellow pilot passenger, Lyn Amestoy, were back over the airport when they lost control during their landing and slammed into the river.

“There was no sign of people on the surface having exited the plane,” Spokane Valley Deputy Fire Chief Andy Hail said shortly after the crash occurred.

When divers helped to pull the piper from 25 feet of water, investigators found the cables controlling the right aileron had been improperly installed.

In the days after the crash, other felts pilots remembered the victims as skilled, conscientious fliers.

“Aviation, by nature, is a very unforgiving venue,” pilot Addison Pemberton told KXLY4 in May 2015. “So anyone in this industry is going to be very safety conscious.”

Rocket Engineering did not return our phone call for comment.

Survivors of at least one of the crash victims have retained an attorney to help them be compensated for their loss.

The NTSB feels this crash could have been easily prevented. The next time a mechanic is working your car, or plane, give them the time they need and whenever possible, double-check whatever parts have been repaired or replaced.       

Story and video:  http://www.kxly.com

Lyndon "Lyn" Amestoy

Richard Lewis "Rich" Runyon

Lyndon "Lyn" Amestoy



A report from the National Transportation Safety Board found the cause of a plane crash in the Spokane River last year.

Two men died when the plane they were flying crash landed into the Spokane River on May 8, 2015 around 4:05 p.m.

Spokane Co. deputy medical investigator, Jim Uttke, identified the two men as Lyndon Amestoy and Richard Runyon at the time.

The NTSB report does not name the two men, though it explains the pilot-in-command had more the 5,800 hours of total flight time and was a retired Air Force Lieutenant Colonel. The other man in the plane held a private pilot certificate, but was not the pilot-in-command.

According to the NTSB report, post-accident examination of the plane found that the aileron balance and drive cables in the right wing had been misrouted and interchanged. The aileron is a hinged surface in the trailing edge of an airplane wing, used to control lateral balance.

The report said both the left and right ailerons would have deflected in the same direction rather than differentially.

“Therefore, once airborne, the pilot was effectively operating with minimal and most likely unpredictable lateral control,” according to the report. “Which would have been exacerbated by wind gusts and propeller torque and airflow effects.”

On the landing approach, the single-engine airplane rolled right and crashed into the river.

The NTSB report explains that the installing mechanic did not notice the error, nor did another mechanic. The pilot did a pre-flight check of primary flight controls, but it was done from within the cockpit.

“The pilot should have been able to recognize that the ailerons were not operating differentially,” wrote NTSB officials.

The report goes on to say the airplane’s owner was scheduled to fly in to pick up the plane the following morning and the accident pilot – who was an engineer at the company and typically flew post-maintenance flights - was helping to return the plane to service.

"It is likely the mechanic and pilot felt some pressure to be finished that day so the owner could depart in the morning and the pilot could attend his appointment," wrote investigators.

Source:  http://www.krem.com




National Transportation Safety Board -  Aviation Accident Final Report:   http://app.ntsb.gov/pdf

Docket And Docket Items  -  National Transportation Safety Board: http://dms.ntsb.gov/pubdms

National Transportation Safety Board -  Aviation Accident Data Summary: http://app.ntsb.gov/pdf


FLYING COLORS AVIATION LLC: http://registry.faa.gov/N962DA 

NTSB Identification: WPR15FA158
14 CFR Part 91: General Aviation
Accident occurred Thursday, May 07, 2015 in Spokane, WA
Probable Cause Approval Date: 09/22/2016
Aircraft: PIPER PA 46 350P, registration: N962DA
Injuries: 2 Fatal.

NTSB investigators either traveled in support of this investigation or conducted a significant amount of investigative work without any travel, and used data obtained from various sources to prepare this aircraft accident report.

The commercial pilot was departing on a local post-maintenance test flight in the single-engine airplane; Four aileron cables had been replaced during the maintenance. Shortly after takeoff, the airplane began to roll right. As the climb progressed, the roll became more pronounced, and the airplane entered a spiraling dive. The pilot was able to maintain partial control after losing about 700 ft of altitude; he guided the airplane away from the airport and then gradually back for a landing approach. During this period, he reported to air traffic control personnel that the airplane had a "heavy right aileron." As the airplane passed over the runway threshold, it rolled right and crashed into a river adjacent to the runway. 

Postaccident examination of the airplane revealed that the aileron balance and drive cables in the right wing had been misrouted and interchanged at the wing root. Under this condition, both the left and right ailerons would have deflected in the same direction rather than differentially. Therefore, once airborne, the pilot was effectively operating with minimal and most likely unpredictable lateral control, which would have been exacerbated by wind gusts and propeller torque and airflow effects.

The sections of the two interchanged cables within the wing were about equal lengths, used the same style and size of termination swages, and were installed into two same-shape and -size receptacles in the aileron sector wheel. In combination, this design most likely permitted the inadvertent interchange of the cables, without any obvious visual cues to maintenance personnel to suggest a misrouting. The maintenance manual contained specific and bold warnings concerning the potential for cable reversal.

Although the misrouting error should have been obvious during the required post-maintenance aileron rigging or function checks, the error was not detected by the installing mechanic. Although the installing mechanic reported that he had another mechanic verify the aileron functionality, that other mechanic denied that he was asked or that he conducted such a check. The mechanic who performed the work also signed off on the inspection; this is allowed per Federal regulations, which do not require an independent inspection by someone who did not perform the maintenance.

The pilot did perform a preflight check; the preflight checklist included confirmation of "proper operation" of the primary flight controls from within the cockpit. Although the low-wing airplane did not easily allow for a differential check of the ailerons during the walk-around, both ailerons could be seen from the pilot's seat; therefore, the pilot should have been able to recognize that the ailerons were not operating differentially.

The accident occurred at the end of the business day, and the airplane had been undergoing maintenance for a longer-than-anticipated period. The airplane's owner was flying in from another part of the country via a commercial airline to pick up the airplane the following morning. The accident pilot, who was an engineer at the company and typically flew post-maintenance test flights, was assisting with returning the airplane to service. He also had an appointment with an FAA medical examiner the next morning (Friday), and he typically did not work on Fridays. It is likely that the mechanic and pilot felt some pressure to be finished that day so the owner could depart in the morning and the pilot could attend his appointment.

The National Transportation Safety Board determines the probable cause(s) of this accident as follows:

The mechanic's incorrect installation of two aileron cables and the subsequent inadequate functional checks of the aileron system before flight by both the mechanic and the pilot, which prevented proper roll control from the cockpit, resulting in the pilot's subsequent loss of control during flight. Contributing to the accident was the mechanic's and the pilot's self-induced pressure to complete the work that day.

HISTORY OF FLIGHT

On May 7, 2015, at 1604 Pacific daylight time, a Piper PA 46-350P, N962DA, struck the Spokane River following an attempted landing at Felts Field Airport, Spokane, Washington. The airplane was owned by Flying Colors Aviation LLC, and operated by the pilot under the provisions of 14 Code of Federal Regulations Part 91. The commercial pilot and pilot rated passenger sustained fatal injuries and the airplane was destroyed during the impact sequence. The local flight departed Felts Field at 1553. Visual meteorological conditions prevailed and no flight plan had been filed.

The airplane had just undergone an annual inspection at the facilities of Rocket Engineering, and the accident flight was to be a post-maintenance test flight. Both the pilot and passenger were employees of Rocket Engineering, and the planned flight time was about 40 minutes.

Audio and radar data provided by the Federal Aviation Administration (FAA) captured the entire flight sequence. The accident was also observed by multiple witnesses at the airport, along with air traffic control personnel in the control tower.

The pilot specifically requested to depart from the longer Runway 4L, and 11 minutes after making the initial call, the airplane began the takeoff roll. Radar data indicated that almost immediately after takeoff it began a climbing turn, 10 degrees to the right. After flying on that heading for about 1.5 miles, the airplane began a more aggressive turn to the right, reaching 1,000 ft above ground level (agl) while on a southbound heading. The sound of labored breathing was then transmitted over the traffic advisory frequency, and the tower controller asked if everything was ok, to which the pilot responded, "That's negative". The airplane's turn radius then tightened to about 700 ft, and within about 45 seconds it completed almost two spiraling turns, while descending about 700 ft. Control tower personnel stated that during this period the airplane was banking about 90 degrees to the right and descending, and they assumed that it was about to crash. A short time later the bank angle began to reduce, and the airplane appeared to recover.

The airplane then began a meandering climb to the east, and about 2 1/2 minutes later the pilot reported, "We are trying to get under control here, be back with you".

The airplane eventually reached the town of Newman Lake, about 11 miles east of the airport, having climbed to about 5,600 ft mean sea level (4,000 ft agl), and the pilot reported, "things seem to be stabilizing", and when asked his intentions by the tower controller he replied, "We are going to stay out here for a little while and play with things a little bit, and see if we can get back."

The airplane began a gradual left turn, and the pilot requested and was approved for a straight-in landing for runway 22R. The airplane became aligned with the runway about 7 miles east of the airport, and a short time later the controller asked the pilot the nature of the emergency, to which he responded, "We have a control emergency there, a hard right aileron". The flight progressed, and a few minutes later the pilot reported that the airplane was on a 3 mile final. The airplane remained closely aligned with the runway centerline throughout the remaining descent, and control tower personnel stated that when the airplane neared the runway threshold it appeared to be flying in a 20-degrees, right-wing-low, attitude.

A tower controller reported that as the still-airborne airplane passed taxiway D, the engine sound changed, as if it was attempting to perform a go-around, and the airplane began a sharp roll to the right. It subsequently collided with the river just north of the airport.

PERSONNEL INFORMATION

The pilot-in-command, who was seated in the left front seat, held a commercial pilot certificate with ratings for airplane single engine land, multiengine land, rotorcraft-helicopter, and instrument airplane and helicopter, along with a flight instructor certificate for airplane single engine land. He also held a repairman, experimental builder certificate, and was rated in the Bell 212 helicopter, and Lockheed L-382 (C-130 Hercules) airplane.

His most recent FAA medical certificate was second class, and dated May 17, 2013, with the limitation that he must have available glasses for near vision. He was 64 years old. Representatives from Rocket Engineering stated the pilot had an appointment for his FAA medical examination at 0800 on the morning following the accident (Friday), and therefore chose to do the flight test that evening instead of the following day. The pilot's wife also stated that he typically did not work on Fridays, but would do so if work schedule required it.

The pilot had accumulated about 5,800 hours of total pilot-in-command flight time, 950 of which were in the accident make and model. He had flown about 20 hours in the accident make and model during the 30 day period leading up to the accident.

He was a retired Air Force Lieutenant Colonel, with 20 years of active service in the capacity of a test pilot, instructor, and search and rescue pilot.

The pilot was employed as an Engineer for Rocket Engineering, and was the primary liaison with the FAA's Flight Standards and Certification divisions. He also typically performed post-conversion, post-maintenance, and customer familiarization flights for the company.

The pilot-rated-passenger held a private pilot certificate with an airplane single engine land rating, issued in 2010. He had accumulated a total of about 122 hour's pilot-in-command flight experience.

He was employed at Rocket Engineering as a customer service and sales representative.

AIRPLANE INFORMATION

The six-seat, low-wing, pressurized airplane was originally manufactured by Piper in 1996 as a PA-46-350P. At that time it was equipped with a Lycoming TIO-540-AE2A, 350 horsepower turbocharged piston engine. In 2007 it was modified by Rocket Engineering under the JetProp LLC supplemental type certificate ST00541SE, which included the installation of a 560 horsepower Pratt and Whitney PT6A-35 turboprop engine.

The airplane was brought to the facilities of Rocket Engineering on April 17 for an annual inspection. During the period leading up to the accident, routine maintenance was performed, along with the replacement of the four aileron cables in the wings, and an aft elevator cable. The mechanic who performed the work stated that the aileron and elevator cables were replaced during the 3 day period leading up to the accident.

The airplane's owner arranged for another maintenance facility on the field to perform an avionics upgrade concurrent with the inspection, while the airplane was still at the Rocket Engineering facilities. The president of the company that performed the avionics upgrade informed the owner that it would take about 40 to 45 hours to complete, over the course of about 18 days. The upgrade included the addition of several new avionics units, and according to the mechanic who performed the work, most was performed in the rear avionics bay, and required the removal of the aft headliner, along with the middle and rear seats on the right side in order to accommodate new electrical cable runs. The avionics shop president stated that as the upgrade progressed, the owner made multiple requests to add additional items to the work scope, and due to time constraints, not all of his requests could be accommodated.

The airplane's owner reported that he had made arrangements to pick up the airplane on May 5th, however as the work progressed, he was informed that the airplane would not be ready in time, and the date was pushed back to May 7 (accident day) and then May 8. He had made plans to travel up from Los Angeles the afternoon of May 7, and was enroute via a commercial airline when the accident happened.

METEOROLOGICAL INFORMATION

The weather conditions reported at Spokane at 1553 were winds from 020 degrees at 7 knots, 10 miles visibility with few clouds at 7,000 ft. The temperature was 71 degrees F, the dew point was 26 degrees F, and the altimeter pressure was 29.93 inHg.

WRECKAGE AND IMPACT INFORMATION

The river was about 25 ft deep at the accident site, and all major airframe components sank within a few minutes of impact. The airplane was recovered by a diving team from the Spokane County Sheriff's department over a 2 day period during the week following the accident.

The fuselage sustained crush damage and fragmentation from the firewall through to the right-side emergency exit door. The engine remained attached to the firewall, and the propeller hub with all four blades remained attached to the engine gearbox. All blades were bent about 90 degrees aft, 8 to 12 inches from their roots. Both wings had separated from the airframe at their roots, with the right wing separating into two sections outboard of the main landing gear. The horizontal stabilizer had detached from the tailcone.

MEDICAL AND PATHOLOGICAL INFORMATION

The Spokane County Office of the Medical Examiner performed an autopsy on both pilots. The deaths were both attributed to the effects of multiple blunt force injuries.

Toxicological tests on specimens recovered from both occupants were performed by the FAA Civil Aerospace Medical Institute (CAMI). Analysis revealed negative findings for ingested ethanol, with the following positive drug findings:

Pilot:

>> 10 (ug/ml, ug/g) Acetaminophen detected in Urine
>> Ranitidine detected in Urine
>> Ranitidine detected in Blood (Cavity)

Acetaminophen is a common-over-the-counter analgesic/antipyretic, and Ranitidine is an anti-histamine used in the treatment of gastric acid secretion. According to CAMI, neither of the drugs detected would have been considered hazardous to flight safety.

Pilot Rated Passenger:

>> Dextromethorphan detected in Urine
>> Dextromethorphan NOT detected in Blood (Cavity)
>> Dextrorphan detected in Urine
>> Dextrorphan NOT detected in Blood (Cavity)
>> Famotidine detected in Urine
>> Famotidine detected in Blood (Cavity)
>> Salicylate detected in Urine

Dextromethorphan, is a cough suppressant, commonly used in over the counter preparations. It is metabolized into dextrorphan, which also has cough suppressant property.

Famotidine (INN) is a histamine H2-receptor antagonist that inhibits stomach acid production, it is commonly marketed under the trade names Pepcidine and Pepcid.

Salicylate is an over the counter analgesic used in the treatment of mild pain.

TESTS AND RESEARCH

Flight Control System Design

The airplane's primary flight controls are conventional, and operated by dual control wheels and rudder pedals through a closed circuit cable system. The ailerons and rudder are interconnected through a spring system located under the main cabin.

An aileron is mounted on the outboard trailing-edge section of each wing via a series of hinges. Movement of each aileron is controlled through a yoke and pin assembly which interfaces with a sector wheel mounted in each wing, just forward of each aileron. Each sector wheel is connected to, and driven by, one aileron drive cable and one balance cable. In each wing, both the balance and drive cables are terminated with identical ball swage fittings, and each swage fitting inserts into one of two identically-sized receptacles in the sector wheel. Both cables are approximately the same length outboard of the pressure vessel seals, which are located about 1 inch apart vertically at the wing root.

In each wing, both cables are routed to the fuselage along the wing trailing edge, and pass through their respective pressure vessel seals in the wing root. Inboard of the pressure vessel seals, the left and right balance cables connect to one another after passing through a center pulley, while the drive cables are routed forward via pulleys to the control wheel assembly in the cockpit. The balance and drive cables are aligned vertically at the pressure vessel seals, and diverge about 3 inches laterally at their respective pulley positions.

The sector wheel design is unique within the Piper fleet to the PA-46.

Control System Examination

The airplane was subject to a series of Piper Aircraft Service Bulletins and Service Letters related to the aileron flight controls.

The aileron control system was examined and found to be in compliance with Piper Service Bulletins 921 and 1190B, which require the installation of cable guards and doublers, respectively"

Piper Service Letter 1131 described cleaning and lubrication procedures for the self-aligning and needle bearings of the outboard aileron sector wheel. Both bearings for the left and right sector wheels appeared intact, and moved freely without any indication of binding.

The outboard section of the right wing had separated, but retained its aileron. A cable remained attached to the lower balance cable attach point of the aileron sector wheel. However, a tag on the cable identified it as part number "5038", which according to Piper maintenance instructions, was the aileron drive cable. The cable was routed over the outboard balance cable pulley, and then through the balance cable pass-through holes along the trailing edge. That cable continued after passing into the fuselage at the balance cable pressure vessel seal. Inboard of the seal, the cable was found to be routed around the right side drive pulley, and forward to the aileron quadrant assembly in the cockpit. Therefore, while the cable tag identified it as a drive cable, and it was properly routed and connected as a drive cable inside the pressure vessel, once it reached the pressure vessel seals, it was incorrectly routed and followed the balance cable path through the wings.

No cable was found attached to the drive section of the right aileron sector wheel. Examination of the remaining cable sections found in the wing revealed that a cable marked with the part number "5036" (right hand aileron balance cable) was routed through the drive cable pressure vessel seal. Inboard of the seal, the cable was connected to the left wing balance cable.

With the as-discovered cable routing, movement of the control wheel would result in the right aileron deflecting in the same direction as the left aileron, rather than in the opposite (per design) direction. No post-accident testing in this configuration was performed, so the extent of the deflection could not be determined.

The rudder trim wheel indicator in the cabin was found in the full left position. Examination of the remaining flight controls did not reveal any anomalies which would have precluded normal operation. A full examination report is contained in the public docket.

Maintenance Procedures

The mechanic who performed and signed off on the annual inspection, along with the subsequent maintenance including the control cable replacement, held an FAA airframe and powerplant certificate (A&P), with inspection authorization (IA). He had been an A&P mechanic for 22 years, and attained his IA rating 17 years prior. He reported replacing aileron cables in the PA-46 series about five prior times in his career.

He stated that he worked exclusively on the accident airplane during the weeks leading up to the accident, and that he replaced the left and right aileron balance cables, along with the two aft aileron drive cables on May 5, 6 and 7. He reported replacing the cables in accordance with the procedures outlined in the maintenance manual, and that he removed and replaced each cable one-at-a-time to prevent inadvertent misrouting. Following completion, he checked aileron operation from both inside and outside the airplane, confirming smooth and full deflection. As part of the test procedures, he checked the neutral position on both ailerons, and then he used a protractor for angular aileron deflection measurements.

The installing mechanic reported that once the work was completed, he asked another mechanic to check his work, asking him specifically to confirm the operation of the ailerons. In a subsequent interview, the other mechanic stated that he assisted with reattaching the ailerons, along with checking security and installation of safety wire, but he was never asked to, nor did he, confirm the correct operation of the ailerons.

The installing mechanic stated that he was called multiple times by the airplanes owner for update checks during the weeks leading up to the accident. Each time additional items were discovered which needed to be repaired, further pushing back the completion date. He eventually referred the owner to the sales representative (pilot rated passenger).

Maintenance Manual

The Piper Maintenance Manual utilized by the mechanic, and applicable to the accident aircraft, was examined at the facilities of Rocket Engineering. The Aileron Control Cables, Rigging and Adjustment section, dated December 23, 1998 included the following warning:

CAUTION:

VERIFY FREE AND CORRECT MOVEMENT OF AILERONS. WHILE IT WOULD SEEM SELF-EVIDENT, FIELD EXPERIENCE HAS SHOWN THAT THIS CHECK IS FREQUENTLY MISINTERPRETED OR NOT PERFORMED AT ALL. ACCORDINGLY, UPON COMPLETION OF AILERON RIGGING AND ADJUSTMENT, VERIFY THAT THE RIGHT AILERON MOVES UP AND THE LEFT AILERON MOVES DOWN WHEN THE CONTROL WHEEL IS TURNED RIGHT, AND THAT THE LEFT AILERON MOVES UP AND THE RIGHT AILERON MOVES DOWN WHEN THE CONTROL WHEEL IS TURNED LEFT.

Pilot Operating Handbook

The preflight checklist outlined in the normal procedures section of the pilot's operating handbook, includes a check to confirm "proper operation" of the primary flight controls from within the cockpit, along with a check of the ailerons and hinges during the walk-around. According to the mechanic, the pilot performed the preflight inspection while the mechanic was still reinstalling the seats and readying the cabin.

The location of the pilot's seat within the cockpit allows for a clear view of both ailerons through the cabin windows.

ADDITIONAL INFORMATION

At the time of the accident, Rocket Engineering had a set of inspection criteria in place for aircraft that had undergone heavy modifications such as the application of the JetProp STC. However, no formal procedures were established requiring that the work performed by a mechanic following an annual inspection be independently inspected. Furthermore, although 14 Code of Federal Regulations Part 121 and 135 (air carrier, commuter, or on-demand operations) state, in part that, "No person may perform a required inspection if that person performed the item of work required to be inspected," there is no equivalent requirement for aircraft operated under Part 91 regulations.

No PA-46 accidents attributed to the reversal of the aileron cables were found in the NTSB accident database, nor did a search of FAA service difficulty reports (SDR's) reveal any events.

No comments: