The Wall Street Journal
By CHUN HAN WONG
Updated Nov. 2, 2015 7:08 p.m. ET
BEIJING—China’s first large passenger jet rolled off the assembly line on Monday after years of delays, bringing Beijing’s dream of developing a rival to Boeing Co. and Airbus Group SE closer to reality.
Still, the single-aisle C919 airliner won’t be delivered to airlines for at least another three years, highlighting the difficulties China has faced in becoming a global player in aviation.
Developed by state-run Commercial Aircraft Corp. of China Ltd., or Comac, the twin-engine jet was initially set for its first flight in 2014, ahead of commercial deliveries starting in 2016. Production setbacks forced Comac to repeatedly extend its deadlines. Company executives say flight testing should start next year, with deliveries expected in 2018 or 2019 at the earliest.
Comac hasn’t disclosed list prices for the C919.
Thousands of guests, including government officials and aerospace executives, witnessed the C919’s rollout at an assembly plant near Shanghai’s Pudong International Airport, according to Chinese state media.
As patriotic songs blared in a large hangar, the C919 prototype—decked out with white, blue and green Comac livery—emerged from behind red curtains under a banner that proclaimed “Dreams take flight” in Chinese, footage aired by state broadcaster China Central Television showed. The jet was then towed past guests before slowing to a stop just outside the hangar.
The 158-to-174 seater, designed in Shanghai but incorporating components sourced globally, relies on foreign technology, including avionics from Rockwell Collins Inc. and engines developed by CFM International, a joint venture between General Electric Co. and the Snecma engine unit of France’s Safran SA. The jet is expected to undergo ground and flight tests spanning two to three years, before attaining certification from China’s civil-aviation regulator and entering commercial service.
China unveiled plans to develop the C919 in 2006 as part of a decadeslong effort to create an advanced aerospace sector capable of breaking the Airbus and Boeing duopoly. Coming after an abortive effort in the 1970s and early 1980s to develop a large commercial jetliner, the C919 was meant to help satisfy growing air-travel demand on the mainland, competing with the likes of Airbus’s A320 family and Boeing’s 737 series.
Airbus and Boeing, in separate emailed statements, congratulated Comac and welcomed competition from the Chinese aerospace firm, saying the aviation market is large enough to accommodate an additional manufacturer.
Airbus and Boeing, for their part, are seeking to shore up their market shares in China by building up an industrial footprint on the mainland, and developing new aircraft that can outperform coming Chinese rivals. Airbus assembles some A320s in the northeastern city of Tianjin, while Boeing in December announced plans for a 737 completion-and-delivery center in China, where aircraft will be painted and interiors installed.
Both companies also plan to widen the number of jets they make using carbon-fiber composite materials, which are lighter and considered more efficient. Boeing Chairman Jim McNerney said last year that Boeing was considering a new composite-materials aircraft that would replace its 737 Max in part because of potential competition from the C919.
About 12% of the C919 airframe comprises advanced composite materials, according to the official Xinhua News Agency. Industry experts say Comac had hoped to use composite materials for about 20% of the jet, so as to reduce fuel consumption, carbon emissions and operating costs, but scaled back those plans amid production delays.
Delays to the C919’s commercial debut mean it could be pitted against newer versions of the Airbus A320 and Boeing 737 that will likely surpass the C919 in operational performance, said Derek Levine, an adjunct professor at the City College of New York, who studies China’s aviation policies.
A challenge for newcomers like Comac is breaking into the vast customer base that Airbus and Boeing already have, and economies of scale that enable the two aerospace giants to build planes at low cost.
Industry analysts nonetheless expect Comac to secure a significant chunk of China’s aviation market, thanks to virtually guaranteed sales to domestic carriers amid booming demand. Boeing, for its part, projects China’s commercial airplane fleet to nearly triple to more than 7,200 aircraft by 2034, including demand for some 4,630 single-aisle planes.
Shanghai-based Comac said it has received 517 orders for the C919 from 21 customers, though Chinese airlines—whose aircraft purchases are controlled by the government—account for the vast majority. Industry analysts say foreign airlines are reluctant to invest in unproven aircraft lacking operational track record and safety certification from Western regulators like the U.S. Federal Aviation Administration and the European Aviation Safety Agency.
“If you’re going to get foreign orders for the C919, I think they’re going to need to see a lot of data about how the aircraft performs,” said Greg Waldron, the Asia managing editor of industry publication Flightglobal. “The airlines will need to see tons of operational data, they’ll need assurances of international customer support.”
Even so, Comac is already planning to develop an even larger commercial airliner—the C929 widebody—that industry executives say will be capable of carrying more than 300 passengers and would compete with the Boeing 777.
The C919’s rollout comes as China prepares for the commercial debut of another homemade passenger jet, the smaller ARJ21 regional jet, which has been plagued by repeated production delays that set back the original 2010 delivery schedule. According to Xinhua, launch customer Chengdu Airlines is expected to take delivery of the 78- to 90-seat turbofan aircraft by the end of this year.
Original article can be found here: http://www.wsj.com
The Comac C919 is unveiled in Shanghai, on November 2, 2015.
- First C919 to roll off assembly line in Shanghai factory
- Comac's plane expected to have first test flight next year
China unveiled a prototype of its first homegrown passenger jet that it hopes will compete with airliners from Boeing Co. and Airbus Group SE, setting the stage for the plane’s first flight sometime next year.
A crowd of several thousand gathered Monday as Commercial Aircraft Corp. of China, also known as Comac, rolled out the single-aisle C919 airliner at the company’s manufacturing and assembly center in Pudong, near Shanghai’s main airport. The plane emerged from layers of red curtains with gold trimming to great applause and patriotic songs blaring from the sound system.
“The air transportation industry of China cannot completely rely on imports,” Li Jiaxiang, head of China’s civil aviation administration, said in a speech. “A great nation must have its own large commercial aircraft.”
China’s focus on a homegrown aerospace industry is part of a broader push to elevate its economy into the ranks of advanced industrialized nations by 2020. With a capacity for 168 passengers, the C919 aims to challenge the dominance of the Airbus A320 and Boeing 737 in the market for planes with more than 100 seats.
Loftier Ambitions
Comac said Monday it has received 517 purchase commitments for the plane, from 21 customers. Nearly all the orders are from Chinese customers.
On Monday, the first C919 rolled through the hangar with its wings above the heads of the cheering crowd, many of whom waved Chinese flags. The plane moved out of the hangar and stood parked on the tarmac, where people posed for group photos.
“It’s a wonderful day for Chinese civil aviation. There’s a great sense of national pride and achievement,” said Russell Beck, a senior director of Panasonic Corp., who was visiting from California. Panasonic supplied the C919’s cabin communication equipment.
China’s aerospace ambitions go beyond the C919. Comac and Russia’s United Aircraft Corp. are aiming to sign an accord by the end of this year to build a wide-body plane together.
Engine Drive
The partnership with Russia could eventually grow to include the development of an engine. China is keen to develop its own engine for the C919, which initially will be powered by a version of the LEAP engine developed by CFM International Inc., a joint venture between GE Aviation LLC and a division of France’s Safran SA.
As part of its engine drive, China is considering a plan to pull various assets related to aerospace engines into a single company, according to people familiar with the matter. The plan is still in the initial stages and straddles multiple ministries.
Comac also is developing a smaller regional jet that’s expected to enter commercial service by the end of this year. The ARJ21 will compete with planes from Embraer SA and Bombardier Inc. as well as a new regional jet from Japan’s Mitsubishi Aircraft Corp.
Mitsubishi Aircraft put off the first test flight of its regional jet to the week of Nov. 9, its fifth delay. By comparison, Comac’s ARJ21 was expected to have its first flight in 2005, with commercial services beginning 18 months later, putting it nearly 10 years behind schedule.
- Source: http://www.bloomberg.com
No comments:
Post a Comment