Friday, June 05, 2015

Cub Crafters CC18-180, United States Department of Agriculture, : Fatal accident occurred June 05, 2015 near Raton Municipal Airport/Crews Field (KRTN), Raton, New Mexico

Aviation Accident Final Report - National Transportation Safety Board: https://app.ntsb.gov/pdf

Investigation Docket -  National Transportation Safety Board: https://dms.ntsb.gov/pubdms


Aviation Accident Data Summary - National Transportation Safety Board:  https://app.ntsb.gov/pdf

The National Transportation Safety Board traveled to the scene of this accident.

Additional Participating Entities: 
Federal Aviation Administration / Flight Standards District Office; Albuquerque, New Mexico
USDA/ APHIS/ Wildlife Services; Cedar City, Utah
Cub Crafters; Yakima, Washington

Lycoming Engines; Milliken, Colorado

USDA-APHIS-WS : http://registry.faa.gov/N162WR

NTSB Identification: CEN15FA255
14 CFR Public Aircraft
Accident occurred Friday, June 05, 2015 in Raton, NM
Probable Cause Approval Date: 05/11/2017
Aircraft: CUB CRAFTERS CC18-180, registration: N162WR
Injuries: 2 Fatal.

NTSB investigators either traveled in support of this investigation or conducted a significant amount of investigative work without any travel, and used data obtained from various sources to prepare this aircraft accident report.

The airplane, which was being operated as a public aircraft, departed with the pilot and a gunner on board for the local flight. The purpose of the flight was to locate and kill coyotes in a geographical area with a history of livestock damage. According to the ground-based spotter, the pilot established radio contact with him after the airplane passed over the mesa that bordered the western edge of the target area. The pilot transmitted that he had observed a coyote behind the spotter's position and that they were going to perform a low-altitude pass for the gunner to kill the coyote. The spotter turned around and located the coyote using his binoculars. He reported that he heard 2 to 3 shotgun blasts as the airplane passed through his field of view on a northeast heading. He remained focused on the coyote as the airplane exited his field of view, and, shortly thereafter, he heard it impact the ground.

A review of recovered GPS data indicated that the airplane descended to about 41 ft above the ground and then entered a climbing left turn. The airplane's calculated groundspeed decreased from 77 mph to 55 mph during the climbing left turn. According to the airplane flight manual, the wings-level aerodynamic stall speed was 52 mph with the flaps retracted; however, the stall speed increased to 56 mph when the airplane was in a coordinated 30° banked turn and 74 mph when the airplane was in a coordinated 60° banked turn. A postaccident examination established that the airplane had crashed in a nose-low, near-vertical attitude. Based on the GPS data and the near-vertical impact angle, the pilot likely did not maintain adequate airspeed during the climbing left turn, which resulted in the airplane exceeding its critical angle of attack and experiencing an aerodynamic stall at a low altitude. The postaccident wreckage examination did not reveal any anomalies that would have precluded normal operation of the airplane during the flight.

Although postaccident toxicological testing of the pilot identified three over-the-counter sedating antihistamines, the lack of available blood for testing prevented a determination as to whether they affected the pilot's psychomotor or cognitive functioning during the accident flight.

 The National Transportation Safety Board determines the probable cause(s) of this accident as follows: 
The pilot's failure to maintain adequate airspeed while maneuvering at a low altitude, which resulted in the airplane exceeding its critical angle of attack and experiencing an aerodynamic stall.

Kelly Wayne Hobbs 


Shannon “Bubba” Tunnell


HISTORY OF FLIGHT

On June 5, 2015, about 0628 mountain daylight time, a Cub Crafters CC18-180 airplane, N162WR, was substantially damaged when it impacted terrain near Raton, New Mexico. The commercial pilot and the gunner were fatally injured. The airplane was registered to and operated by the United States Department of Agriculture (USDA) as a public aircraft. Day visual meteorological conditions prevailed for the local flight, which departed Raton Municipal Airport (RTN), Raton, New Mexico, about 0615.

The purpose of the flight was to locate and terminate coyotes in a predetermined geographic area with a history of livestock damage. A typical mission profile consisted of locating coyotes with the aid of a ground-based spotter, after which the pilot would fly a low-altitude pass and the rear-seated gunner would shoot the coyote with a shotgun. According to the ground-based spotter, on the day of the accident, the pilot established radio contact with him after the airplane had passed over the mesa that bordered the western edge of the target area. The pilot transmitted that he saw a coyote behind the spotter's position and that they were going to perform a low-altitude pass for the gunner to kill the coyote. The spotter turned around and located the coyote using his binoculars. He reported that he heard 2 to 3 shotgun blasts as the airplane passed through his field of view on a northeast heading. He remained focused on the coyote as the airplane exited his field of view; shortly thereafter, he heard it impact the ground. He looked up from his binoculars and saw that the airplane had crashed about 3/4 mile from his position.

PERSONNEL INFORMATION

According to Federal Aviation Administration (FAA) records, the 54-year-old pilot held a commercial pilot certificate with single-engine land and instrument airplane ratings. The pilot's last aviation medical examination was completed on June 11, 2014, when he was issued a second-class medical certificate with a limitation for corrective lenses. His last flight proficiency review was completed on November 20, 2014.

The pilot's flight history was established using his logbook and a field diary in which he recorded his recent flights. The final logbook entry was dated April 23, 2015, at which time he had accumulated 13,411.3 hours total flight time. According to the field diary, the pilot had accumulated 72.9 hours since the final logbook entry. At the time of the accident, the pilot had a total flight experience of 13,484.2 hours of which 13,033.6 hours were as pilot-in-command. The operator reported that nearly all of the pilot's total flight experience was flown in Piper PA-18 or Cub Crafters CC18-180 airplanes. He had flown 397.9 hours during the year before the accident, 319.5 hours during the 6 months before the accident, 142.4 hours during the 90 days before the accident, and 62.4 hours during the month before the accident. Including the accident flight, the pilot had flown 5.3 hours during the 24-hour period before the accident.

AIRCRAFT INFORMATION

The airplane was a two-seat, single-engine Cub Crafters CC18-180, serial number CC18-0035. The airplane was a high-wing monoplane with a steel tube fuselage structure and fabric covering for the wings, fuselage, and tail surfaces. The airplane was powered by a 180-horsepower, 4-cylinder Lycoming O-360-C4P engine, serial number L-42046-36E. The engine provided thrust through a fixed-pitch, two-blade, McCauley 1A200/FA8241 propeller, serial number AHA46002. The tandem seat airplane was equipped with a fixed conventional landing gear and wing flaps. The airplane had a maximum allowable takeoff weight of 2,300 pounds. The Federal Aviation Administration (FAA) issued the airplane a standard airworthiness certificate on December 29, 2008.

The airplane's recording tachometer indicated 3,125.7 hours at the accident site. The airframe had accumulated 3,125.7 hours since new. The factory-new engine was installed on February 1, 2013, at 1,992.8 tachometer hours. The engine subsequently accumulated 1,132.9 hours total time. The factory-new propeller was installed on February 4, 2013, at 1,996.9 tachometer hours. The propeller subsequently accumulated 1,128.8 hours total time. The last 100 hour/annual inspection of the airplane was completed on May 19, 2015, at 3,092.5 total airframe hours. The airplane had accumulated 33.2 hours since the inspection. A postaccident review of the maintenance records found no history of unresolved airworthiness issues.

The airplane had a total fuel capacity of 50 gallons (44 gallons usable) distributed between two wing fuel tanks. Based on available fueling records, the airplane likely departed with a full fuel load after being refueled the day before the accident with 33 gallons of 100 low-lead aviation fuel.

METEOROLOGICAL INFORMATION

The nearest aviation weather reporting station was located at Raton Municipal Airport (RTN), Raton, New Mexico, about 21 miles west of the accident site. At 0653, the RTN automated surface observing system reported: wind 050° at 7 knots, a clear sky, 10 miles surface visibility; temperature 12°C; dew point 7°C; and an altimeter setting of 30.19 inches of mercury.

The ground-based spotter reported that, at the time of the accident, the surface wind was calm to 1 mph with high altitude clouds observed to the east of the accident site.

WRECKAGE AND IMPACT INFORMATION

The airplane wreckage was located in an open pasture with no trees or other obstructions in the general vicinity of the accident site. The elevation of the accident site was 6,982 ft mean sea level (msl). The aircraft wreckage was orientated on a 010° magnetic heading. The airplane was found in a near-vertical attitude with the engine pushed back into the cabin. There was no appreciable wreckage propagation from the point-of-impact. The main wreckage consisted of the entire airframe, including all structural components and flight control surfaces. Flight control cable continuity was established from the forward cockpit controls to the individual control surfaces. The rear-seat control stick had been removed for the accident flight. The elevator trim jack screw was found in a neutral position. The cockpit flap handle was displaced aft during impact; however, the wing flaps appeared to be in the fully retracted position. Both wing tanks were damaged during the accident and did not contain any residual fuel; however, first responders reported that there was a substantial fuel odor at the accident site. The cockpit fuel selector was found in the BOTH position. The fuel filter assembly contained a fluid consistent in color and odor to 100 low-lead aviation fuel. The fuel filter assembly fuel sample did not exhibit water or particulate contamination. The magneto switch was observed in the BOTH position before it was turned OFF by first responders. The stall warning horn was extracted from the right wing root and rewired to the wing-mounted lift sensor switch. Although the lift sensor switch had evidence of impact damage, the stall warning horn produced an aural tone when electrical power was applied and the switch contact was closed. The airspeed indicator exhibited a visible outline of the pointer that had been deposited on the gauge face. The observed white outline was pointed toward 69 mph. The propeller had separated from the engine crankshaft flange and was buried about 4 inches into the ground. The propeller blades exhibited S-shape spanwise bending, chordwise scratches and burnishing, and a leading-edge gouge.

The engine remained partially attached to the firewall by its mounts and control cables. Mechanical continuity was confirmed from the engine components to their respective cockpit controls. Internal engine and valve train continuity was confirmed as the engine crankshaft was rotated. Compression and suction were noted on all cylinders in conjunction with crankshaft rotation. The upper spark plugs were removed and exhibited features consistent with normal engine operation. Both magnetos provided spark on all leads when rotated. There were no obstructions between the air filter housing and the carburetor. The carburetor fuel bowl contained a liquid that was consistent with the color and odor of 100 low-lead aviation fuel. The fuel sample obtained from the carburetor bowl did not exhibit any water or particulate contamination.

The postaccident wreckage examination did not reveal any anomalies that would have precluded normal operation of the airplane during the accident flight.

MEDICAL AND PATHOLOGICAL INFORMATION

The New Mexico Office of the Medical Investigator in Albuquerque, New Mexico, performed an autopsy on the pilot. The cause of death was attributed to multiple blunt-force injuries sustained during the accident. Additionally, the autopsy report indicated that no ethanol was detected in vitreous fluid. The FAA's Bioaeronautical Sciences Research Laboratory in Oklahoma City, Oklahoma, performed toxicology tests on samples obtained during the autopsy. The test results were limited by the absence of available blood for testing. However, acetaminophen (125 ug/ml) and salicylate were detected in urine; doxylamine (0.028 ug/ml), cetirizine, and chlorpheniramine were identified in kidney tissue; and chlorpheniramine and dextrorphan were found in liver. No ethanol was detected in urine.

Acetaminophen is a pain and fever reliever commonly sold with the name Tylenol. Salicylate is a metabolite of aspirin, an anti-inflammatory analgesic. Cetirizine is an antihistamine available over the counter with a variety of names including Zyrtec. Chlorpheniramine is another antihistamine available over the counter in a variety of combination products many of which also include acetaminophen and dextromethorphan. Doxylamine is another antihistamine available in several combination products such as Nyquil, but it is also the active ingredient in some Unisom products designed to induce sleep. Dextrorphan is a metabolite of dextromethorphan, an over the counter cough medicine. Cetirizine, chlorpheniramine, and doxylamine all carry label warnings, "May impair mental and/or physical ability required for the performance of potentially hazardous tasks (e.g., driving, operating heavy machinery)."

TESTS AND RESEARCH

A Garmin GPSMAP 496 device was recovered from the wreckage, and its non-volatile memory was downloaded onsite with computer software. According to a review of the recovered data, the accident flight departed RTN at 0615:43 and proceeded eastbound toward the target area. At 0627:22, the airplane passed over the mesa that bordered the western edge of the target area about 140 ft agl and subsequently descended into the valley on an easterly track. At 0627:54, the airplane turned to the northeast and continued to descend. At that time, the airplane was about 160 ft agl and had a calculated ground speed of about 120 mph. At 0628:32, the airplane had descended to about 41 ft agl and had a ground speed of about 77 mph. The airplane subsequently entered a climbing left turn, during which the airplane's groundspeed decreased to about 55 mph. At 0628:41, the final GPS data point was recorded about 95° into the airplane's climbing left turn. The airplane was about 100 ft agl and had a groundspeed of about 62 mph. The final GPS data point was located about 221 ft northeast of the accident site.

According to the Cub Crafters CC18-180 airplane flight manual, the wings-level aerodynamic stall speed was 52 mph with the flaps retracted. The stall speed increased to 56 mph when the airplane was in a coordinated 30° banked turn and 74 mph when the airplane was in a coordinated 60° banked turn.

ADDITIONAL DATA/INFORMATION

According to National Transportation Safety Board (NTSB) Safety Alert No. SA-019, Prevent Aerodynamic Stalls at Low Altitude, many aerodynamic stalls occur in visual meteorological conditions (VMC) when a pilot becomes momentarily distracted from the primary task of flying, such as while maneuvering in the airport traffic pattern, during an emergency, or when fixating on ground objects. Additionally, depending on how an airplane is being operated, an aerodynamic stall can occur at any airspeed, at any attitude, and with any engine power setting. The safety alert further indicated that an increase in airplane bank angle will increase the aerodynamic stall speed exponentially.




NTSB Identification: CEN15FA255 
14 CFR Public Use
Accident occurred Friday, June 05, 2015 in Raton, NM
Aircraft: CUB CRAFTERS CC18-180, registration: N162WR
Injuries: 2 Fatal.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed. NTSB investigators either traveled in support of this investigation or conducted a significant amount of investigative work without any travel, and used data obtained from various sources to prepare this aircraft accident report.

On June 5, 2015, about 0628 mountain daylight time, a Cub Crafters model CC18-180 airplane, N162WR, was substantially damaged when it impacted terrain near Raton, New Mexico. The commercial pilot and his gunner were fatally injured. The airplane was registered to and operated by the United States Department of Agriculture (USDA) as a public-use flight. Day visual meteorological conditions prevailed for the local flight, which had departed Raton Municipal Airport (RTN), Raton, New Mexico, about 0615.

The purpose of the flight was to locate and terminate coyotes in a predetermined geographical area with a history of livestock damage. A typical mission profile included locating coyotes with the aid of a ground-based spotter, after which the pilot would fly a low-altitude pass during which the rear-seated gunner would shoot the coyote with a shotgun. According to a GPS device recovered from the wreckage, at 0615:43 (hhmm:ss), the accident flight departed RTN and proceeded eastbound toward the target area. According to the ground-based spotter, the pilot established radio contact after the accident airplane had passed over the mesa that bordered the western edge of the target area. The pilot transmitted that he had located a coyote behind the spotter's position and that they were going to perform a low altitude pass for the gunner to terminate the coyote. The spotter turned around and located the coyote with the use of his binoculars. He reported that he heard 2-3 shotgun blasts as the airplane passed through his field-of-view on a northeast heading. He remained focused on the coyote as the airplane exited his field-of-view. The spotter reported that, shortly after the airplane had exited his field-of-view, he heard the sound of an impact. He looked up from his binoculars and saw that the airplane had crashed about 3/4 mile from his position.

According to a preliminary review of the recovered GPS data, the airplane passed over the mesa that bordered the western edge of the target area about 165 feet above ground level (agl) and entered a descent on an easterly heading. At 0627:54, the airplane turned to a northeast heading and continued to descend. At that time the airplane was about 150 feet agl and had a ground speed of 115 miles per hour (mph). At 0628:32, the airplane had descended to about 42 feet agl and had a ground speed of 74 mph. The airplane then entered a climbing left turn. According to the GPS data, the airplane's ground speed decreased to about 62 mph during the climbing left turn. At 0628:41, the final GPS data point was recorded about 95 degrees into the left turn and the airplane had climbed to about 97 feet agl. The final GPS data point was about 232 feet northeast of the accident site.

The wreckage was located in an open pasture with no trees or other obstructions in the general vicinity of the accident site. The aircraft wreckage was orientated on a 010 degree magnetic heading. The airplane was found in a near vertical attitude with the engine pushed back into the cabin. There was no appreciable wreckage propagation from the point-of-impact. The main wreckage consisted of the entire airframe, including all structural components and flight control surfaces. Flight control cable continuity was established from the forward cockpit controls to the individual control surfaces. The rear-seat control stick had been removed for the accident flight. The elevator trim jack screw was found in a neutral position. The cockpit flap handle was displaced aft during impact; however, the wing flaps appeared to be in the fully retracted position during the postaccident examination. Both wing tanks were damaged during the accident and did not contain any residual fuel during the postaccident examination; however, first responders reported that there was a substantial fuel odor at the accident site. The cockpit fuel selector was found in the BOTH position. The gascolator bowl contained a fluid consistent in color and odor to 100 low-lead aviation fuel. The gascolator fuel sample did not exhibit water or particulate contamination. The magneto switch was observed in the BOTH position before it was turned OFF by first responders. The stall warning horn was extracted from the right wing root and rewired to the wing-mounted lift sensor switch. Although the lift sensor switch had evidence of impact damage, the stall warning horn produced an aural tone when electrical power was applied and the switch contact was closed. The airspeed indicator exhibited a visible outline of the pointer that had been deposited on the gauge face. The observed white outline was pointed toward 69 mph. The propeller had separated from the engine crankshaft flange and was buried about 4 inches into the terrain. The propeller blades exhibited S-shape spanwise bending, chordwise scratches and polishing, and a leading edge gouge.

The engine remained partially attached to the firewall by its mounts and control cables. Mechanical continuity was confirmed from the engine components to their respective cockpit controls. Internal engine and valve train continuity was confirmed as the engine crankshaft was rotated. Compression and suction were noted on all cylinders in conjunction with crankshaft rotation. The upper spark plugs were removed and exhibited features consistent with normal engine operation. Both magnetos provided spark on all leads when rotated. There were no obstructions between the air filter housing and the carburetor. The carburetor fuel bowl contained a liquid that was consistent with the color and odor of 100 low-lead aviation fuel. The fuel sample obtained from the carburetor bowl did not exhibit any water or particulate contamination. The postaccident examination revealed no evidence of mechanical malfunctions or failures that would have precluded normal engine operation.

The nearest aviation weather reporting station was located at Raton Municipal Airport (RTN), Raton, New Mexico, about 21 miles west of the accident site. At 0653, the RTN automated surface observing system reported: wind 050 degrees at 7 knots, a clear sky, 10 mile surface visibility; temperature 12 degrees Celsius; dew point 7 degrees Celsius; and an altimeter setting of 30.19 inches of mercury.

The ground-based spotter reported that, at the time of the accident, the surface wind was calm to 1 mph with high altitude clouds observed to the east of the accident site.



RATON, N.M. (AP) - The U.S. Department of Agriculture says a pilot with the Wildlife Services program and a state wildlife specialist died when their plane crashed in northeastern New Mexico.

The agency says pilot Kelly Hobbs and Shannon "Bubba" Tunnell of the New Mexico Department of Agriculture were the only two aboard the single-engine plane when it went down early Friday near Raton.

Officials confirmed Monday that Hobbs and Tunnell were on a mission to curb damage caused by wildlife in Colfax County.

The National Transportation Safety Board is investigating.

Hobbs had been a pilot with the federal program since 1992. He had more than 13,500 hours of flight experience and had worked in New Mexico, Colorado and Utah.

Tunnell had been a specialist with the state since 2009 and had extensive training in aerial predator management.

Two people died in a single-engine airplane crash in northeastern New Mexico about 4.5 miles east of Raton early Friday morning, a Federal Aviation Administration official said.

The identities of the victims were not immediately released, and the cause of the crash remained unclear as of Friday evening.

FAA spokesman Lynn Lunsford said the Piper PA-18 aircraft was being operated by the U.S. Department of Agriculture when it crashed, killing both the pilot and a passenger.

Sgt. Chad Pierce, a New Mexico State Police spokesman, said his agency dispatched officers to the scene Friday morning, but he couldn’t provide any other details about the incident.

The National Transportation Safety Board is investigating the incident, but a spokesman couldn’t provide any details about the crash.

According to the National Weather Service, the weather near Raton on Friday morning was slightly overcast with scattered showers and thunderstorms in the area.

No comments:

Post a Comment