HERITAGE ROTORS LLC: http://registry.faa.gov/N631DP
Bloomsburg, Columbia County -- "It puts a little bit of sorrow on the last day."
The last day of the Bloomsburg Fair is always bittersweet, but tragedy struck the fairgrounds on Friday night. A helicopter pilot for the company that offers rides to fairgoers was struck by a rotor. The helicopter had landed and was in the process of refueling and changing pilots.
"He went back to talk to the other pilot, and that's when the rotor struck him," said William Barratt with the Bloomsburg Fair Association.
69-year-old Carl Enlow of Reading was transported by Life Flight to Geisinger Medical Center in Danville, where he died. Enlow had over 50 years of experience, and he was also a former military pilot.
"That just goes to prove that anything can happen," said Barratt.
"He's been doing this for many years," said Dawn Kingston of Bloomsburg. "I'm sure that a lot of people who return to the fair probably know him."
Heritage Rotors has been giving helicopter rides since 1993, and the attraction is popular at the Bloomsburg Fair. His friends say Enlow enjoyed helping other people, and last year he fulfilled the dying wish of a six-year-old Hazleton girl battling cancer.
"He was a very sweet man with a heart of gold, and we really appreciated everything he did," said Kingston.
The Bloomsburg Fair Association is returning its profits from the helicopter rides to Enlow's widow.
"The fair board is going to do whatever we can to help her with whatever she needs," said Barratt.
A memorial fund is set-up for the family of Carl Enlow. Anyone interested in making a donation can send a check to the Bloomsburg Fair Association.
Original article: http://www.pahomepage.com
Story, Video and Comments/Reaction: http://wnep.com
NTSB Identification: ERA13LA433
14 CFR Part 91: General Aviation
Accident occurred Friday, September 27, 2013 in Bloomsburg, PA
Probable Cause Approval Date: 08/14/2014
Aircraft: ENSTROM F-28C, registration: N631DP
Injuries: 1 Fatal, 1 Uninjured.
NTSB investigators may not have traveled in support of this investigation and used data provided by various sources to prepare this aircraft accident report.
The pilot/owner had just taken control of the helicopter from another pilot. As the relieved pilot was walking away from the helicopter and between the 10- and 11-o’clock position forward of the helicopter, he came into contact with a rotating main rotor blade. The pilot/owner stated that, when exiting the helicopter, it was the company’s practice to disengage the rotor drive system and secure the collective control. In this condition, the rotor blades droop below the normal height, and the drooping is most pronounced in the 9- to 12-o’clock position of the rotor disk. According to the helicopter manufacturer representative, the main rotor height can vary depending on how the helicopter landing gear was serviced. In addition, depending on the position of the cyclic, the main rotor can descend lower than 6 feet when the main rotor is operating. It is likely that the pilot/owner unintentionally moved the cyclic, which resulted in the rotor blade descending, and, in combination with the rotor droop, the main rotor blade would have been low enough to strike the relieved pilot’s head.
The National Transportation Safety Board determines the probable cause(s) of this accident as follows:
The relieved pilot’s failure to maintain clearance from the rotating main rotor blades after he exited the helicopter.
On September 27, 2013, at 1938 eastern daylight time, an Estrom F-28C, N631DP, received minor damage when a relieved pilot, who was walking from the helicopter, was fatally injured after coming into contact with a rotating main rotor blade, near Bloomsburg, Pennsylvania. The airline transport pilot, seated at the controls in the helicopter, was the sole occupant and was not injured. The helicopter was registered to and operated by Heritage Rotors, LLC, under the provisions of Title 14 Code of Federal Regulations Part 91 as a local sightseeing flight at a local fair. Day visual meteorological conditions prevailed, and no flight plan had been filed. The flight was originating at the time of the accident.
According to the pilot/owner's written statement in the NTSB Pilot/Operator Aircraft Accident/Incident Report, he "approached the left side of the helicopter and rested on the seat and looked into the helicopter… [he] was looking down onto the pilot seat considering the location of the pilot seat belt, the headset, and the general condition of the interior. At this point, nothing in the cockpit was touched and was exactly as [the relieved pilot] had left it. It was at this moment that [the pilot] heard a 'thud.'"
According to local law enforcement personnel, the pilot/owner seated in the left front seat of the helicopter had just taken over from the pilot who was walking away from the helicopter when the accident occurred. The pilot in the helicopter stated to local law enforcement immediately after the accident that he saw the previous pilot walking away, thought he had walked beyond the main rotor blades, and looked down to fasten his seatbelt. While he was fastening his seatbelt, he heard the main rotor blades strike something, looked up, and saw the relieved pilot on the ground.
The local law enforcement report stated that the relieved pilot was located between the 10 and 11 o'clock position forward of the helicopter. In addition, the helipad was located in a level, grassy area near the entrance to the fair grounds.
According to Federal Aviation Administration records, the relieved pilot held a commercial pilot certificate for airplane single-engine and multiengine land, airplane single-engine sea, instrument airplane and helicopter, glider, and rotorcraft helicopter. He reported on his last insurance application that he accumulated 3,900 hours of total flight time, of which, 600 hours were in the same make and model as the accident helicopter. His most recent second-class medical certificate was issued in December 2012. At that time, the pilot reported a height of 71 inches. According to the helicopter flight manual, the main rotor could droop to a minimum height of 72 inches.
According to the FAA records, the helicopter was manufactured in 1980 and registered to the operator in 2010. According to the pilot/owner, the most recent annual inspection was performed on July 2, 2013. At the time of the accident, the helicopter had accumulated 2198 hours of total flight time. According to the helicopter manufacturer training guide, the helicopter was equipped with a crew compartment that consisted of "pilot and passenger/co-pilot seating, instrument panel, radio console, and pilot and co-pilot flight controls mounted to the aluminum floor structure and enclosed in the fiberglass cabin shell. The co-pilot controls are removable and a seat cushion for the third passenger is inserted into the space vacated when the co-pilot collective is removed."
The pilot/owner, reported that there were no mechanical anomalies or malfunctions with the helicopter that would have precluded normal operation prior to the accident. He further reported that he and the relieved pilot both "conducted every aspect of [the] operation purposely for our safety and that of our patrons and neighbors." In addition, he stated that when exiting the helicopter, it is the company's practice to "disengage the rotor drive system and secure the collective control by means of the friction lock…In this condition, the rotor blades 'droop' below the normal height. This drooping is non-symmetrical and most pronounced in the 9 – 12 o'clock position of the rotor [disk]."
In the Operator/Owner Recommendation section of the NTSB Pilot/Operator Aircraft Accident/Incident Report, the pilot/owner stated that he "cannot conceive why [the relieved pilot] would knowingly approach the aircraft in a position he knew well to be the lowest point of the rotor system. This was not our practice and absolutely not his habit."
The weather conditions reported at an airport about 26 nautical miles northwest of the accident location around the time of the accident included calm wind.
According to the helicopter manufacturer representative, the main rotor height can vary depending on how the helicopter landing gear was serviced. In addition, depending on the position of the cyclic, the main rotor can descend lower than six feet when the main rotor is operating.
According to the FAA Helicopter Flying Handbook, "The cyclic pitch control is usually projected upward from the cockpit floor, between the pilot's legs or between the two pilot seats in some models. This primary flight control allows the pilot to fly the helicopter in any direction of travel: forward, rearward, left, and right…The purpose of the cyclic pitch control is to tilt the tip-path plane in the direction of the desired horizontal direction. The cyclic controls the rotor disk tilt versus the horizon, which directs the rotor disk thrust to enable the pilot to control the direction of travel of the helicopter. The rotor disk tilts in the same direction the cyclic pitch control is moved. If the cyclic is moved forward, the rotor disk tilts forward; if the cyclic is moved aft, the disk tilts aft, and so on."
Almost went for a ride in that bird last weekend, just saving money for more R-22 rides. Have not read your blog in a long time. My PA-32 got destroyed and city settlement bought me a modest yet nice town house on an island. Glad I found your blog again.
ReplyDeleteFlying is Dangerous is my motto.