BRENTCO AERIAL PATROL INC: http://registry.faa.gov/N5266N
FAA Flight Standards District Office: HOUSTON FSDO SW-09
AIRCRAFT EXPERIENCED AN ENGINE FAILURE AND LANDED IN A FIELD 1.5 MILES SOUTHEAST OF BEAUMONT (BPT), TEXAS
Date: 30-JAN-17
Time: 20:32:00Z
Regis#: N5266N
Aircraft Make: CESSNA
Aircraft Model: 182Q
Event Type: INCIDENT
Highest Injury: NONE
Aircraft Missing: No
Damage: NONE
Activity: PERSONAL
Flight Phase: EMERGENCY DESCENT (EMG)
Operation: 91
City: BEAUMONT
State: TEXAS
PORT ARTHUR - A pilot walked away without injury after making an emergency landing west of the Jack Brooks Regional Airport.
No one was injured in the incident according to the Jefferson County Sheriff's Office.
The plane landed near the intersection of West Port Arthur Road and Guthrie Rd and the investigation is being handled by the Texas Department of Public Safety according to the sheriff's office.
From the Texas Department of Public Safety...
At approximately 3:00p.m., the Texas Department of Public Safety received a report of a possible plane crash near Jack Brooks Regional Airport.
Troopers responded to the airport to verify reports of an airplane crash. Troopers confirmed that there was no plane crash, but a Cessna aircraft had mechanical issues and made an emergency landing in a field between US 69 and West Port Arthur Road.
At this time, there are no reported injuries and no damage to the aircraft.
There are no further details to be released.
Source: http://www.12newsnow.com
On Jan. 31 at approximately 3:00 p.m., the Texas Department of Public Safety received a report of a possible plane crash near Jack Brooks Regional Airport, TxDPS PIO Stephanie Davis reported.
Troopers responded to the airport to verify reports of an airplane crash. Troopers confirmed that there was no plane crash, but a Cessna aircraft had mechanical issues and made an emergency landing in a field between US 69 and West Port Arthur Road.
At this time, there are no reported injuries and no damage to the aircraft.
Source: http://theexaminer.com
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment