http://registry.faa.gov/N201RD
It all started when the pilot took off from runway 7 at Herlong Airport at 9300 Normandy Boulevard but lost all power at about 300 feet in the air, says JSO. He attempted to land the plane in a grassy field east of the runway, but JSO says the plane skidded to a stop. The pilot and his one passenger sustained very minor injuries.
Federal Aviation Administration is leading an investigation into the incident with assistance from JSO.
JSO says the plane is a 1977, 4-passenger Mooney M20J aircraft.
Original article ➤ https://www.firstcoastnews.com
March 04, 2018: Tire blew on landing, aircraft then went off the runway into the grass.
Federal Aviation Administration / Flight Standards District Office; South Carolina
Date: 04-MAR-18
Time: 16:13:00Z
Regis#: N201RD
Aircraft Make: MOONEY
Aircraft Model: M20J
Event Type: INCIDENT
Highest Injury: UNKNOWN
Aircraft Missing: No
Damage: UNKNOWN
Activity: UNKNOWN
Flight Phase: LANDING (LDG)
Operation: 91
City: MYRTLE BEACH
State: SOUTH CAROLINA
Federal Aviation Administration / Flight Standards District Office; Greensboro
October 10, 2016: Aircraft landed gear up.
Damage: Prop strike, engine stoppage, belly damage, some sheet metal damage to wings
Date: 10-OCT-16
Time: 18:00:00Z
Regis#: N201RD
Aircraft Make: MOONEY
Aircraft Model: M20J
Event Type: Incident
Highest Injury: None
Damage: Unknown
Flight Phase: LANDING (LDG)
City: ROXBORO
State: North Carolina AIRCRAFT: Mooney M20J N201RD
ENGINE - M&M, S/N: IO-360-A3B6D S/N L-16709-81A
PROPELLER – M&M, S/N: McCauley MDB2D34C212 S/N 765625
APPROXIMATE TOTAL HOURS (estimated TT & TSMO from logbooks or other information):
ENGINE: 1237.5 TS NEW
PROPELLER: 1237.5 TS NEW
AIRFRAME: 1237.5 TS NEW
DESCRIPTION OF ACCIDENT: Gear up landing
DESCRIPTION OF DAMAGES: Prop strike, engine stoppage, belly damage, some sheet metal damage to wings.
LOCATION OF AIRCRAFT: KTDF (Person County Airport, Roxboro, NC)
REMARKS: Aircraft is being hangared in private hangar at KTDF.
Read more here: http://www.avclaims.com/N201RD.htm
No comments:
Post a Comment